Next Generation Vehicle Protection – Available Now at The Master Locksmith
The Ghost is a unique, next generation device that secures your vehicle without the need for cutting wires or adding after-market key fobs. The device is connected to the vehicles CAN data network and a personalised PIN code is programmed into the Ghost using buttons on the dash and steering wheel.
Engine start blocking
The Ghost will prevent the starting of the engine unless the unique, user defined PIN code has been entered first.
Undetectable using diagnostics
A modern thief can use diagnostics to detect circuit cuts on modern vehicles. The Ghost has no circuit cuts so it cannot be found using these methods.
No radio frequency signals
Thieves cannot use sophisticated RF scanning, codegrabbing technology to detect what security device your vehicle has when it does not transmit any signals like conventional security systems.
Advantages of using the CAN data network
The use of the CAN data bus has several advantages including low risk during installation, low probability of detection, and allows for placement almost anywhere in the vehicle.
Because the unit communicates with the ECU on the data bus to immobilise the vehicle there is no way a thief could listen for the tell-tale clicking of a traditional immobiliser relay.
Stops key cloning and ECU swapping
A thief cannot simply add a new key or replace an ECU to bypass the Ghost and start the vehicle. Only a correct PIN code will allow the engine to start.
Tested for each vehicle
Due to the nature of the data bus communication the Ghost has been adapted and tested for every vehicle we list as compatible. If we list your vehicle you can be sure we have thoroughly tested its operation with the Ghost.
Weatherproof tiny device
The Ghost is sealed and so small it can be installed and wrapped into the vehicle harness anywhere in the vehicle making it near impossible for a thief to find.
Emergency PIN code override
If the PIN code is forgotten, the car is sold or a button is broken there is a secure, unique reset code for each device.
Service / Valet mode
Service mode allows your vehicle to temporarily start and drive without requiring the PIN code. The Ghost will exit service mode based on speed and time or by simply entering the PIN code.
Simple PIN code change process
At any time you can easily change the PIN code. Only you will know the unique PIN code for your vehicle.
Enter the PIN code with original buttons
The buttons in modern vehicles send data all around the vehicle which allows us to detect many different keys being pressed without extra wiring.